Laser-cut template catalog

Browse parametric KerfHub templates for laser-cut boxes, drawers, bins, racks, inserts, stands, and calibration tools.

• Kerf & Fit Test Configurable calibration sheet with labeled joint coupons for dialing in kerf and tolerance before cutting a full project.
• Drawer wall cabinet Grid cabinet with derived laser-cut drawers for screws, bits, and small parts, ready to resize by rows and columns.
• Drawer with handle Standalone pull-out drawer with a single front and glued T-handle for custom cabinets, shelves, and organizer builds.
• Storage shelf Small shelving cabinet for bins, components, and workshop supplies with editable grid dimensions and finger joints.
• Display shelf Open display rack with shallow shelves and a small front retainer for parts, models, cards, or retail samples.
• Shelf bin Open-front storage bin with a low front lip for quick picking of screws, fittings, and everyday shop supplies.
• Stackable shelf bin Open-front bin with raised outer side walls that nest over the next bin for compact vertical workshop storage.
• Wall hopper Wall-mounted open bin with mounting slots and a low front for visible, reachable storage above a bench.
• Hardware sorting tray Open tray with removable divider strips, a scoop-friendly front lip, and one label window per column for sorting screws, nuts, and small repair parts.
• Compartment insert Drop-in tray with a tabbed perimeter and half-lap dividers for organizing drawers, cases, and tool boxes.
• Divider grid Standalone half-lap divider set without a base, sized for boxes, trays, drawers, and custom storage pockets.
• Open 5-panel box Stabilized cut-only box with bottom, front, back, left, and right panels for general storage and project enclosures.
• Closed six-panel box Closed finger-joint box with a top panel for compact enclosures, protected storage, and simple boxed assemblies.
• Loose-lid box Box body with a removable loose lid and adjustable clearance for gifts, samples, spare parts, and protected storage.
• Vented electronics enclosure Compact laser-cut project enclosure with finger-jointed walls, a removable screw-hole lid, cooling vents, and connector cutouts.
• Solder fume extractor Laser-cut fan and filter enclosure with a front grille, screw holes for a square PC fan, rear filter access, cable cutouts, and support feet.
• Blade disposal bank Closed used-blade container with a narrow top slot, internal baffle plates, a warning label window, and a separate closure strip for sealing when full.
• Acrylic display case Transparent-style display vitrine with a base plinth, front access door, side door tracks, and internal display shelves.
• Desktop caddy Small open organizer with a top tool plate and rectangular tool slots for keeping bench tools upright and visible.
• Battery organizer Parametric plywood rack with rounded AA, AAA, or mixed-cell wells, a front label rail, and rear mounting slots for bench or wall storage.
• Soldering station tray Electronics bench tray with a slotted tool bridge, vented back plate, spool rod side holes, and adjustable small-bin dividers.
• Cable spool rack Parametric wire and cable spool rack with axle holes, wire guide holes, rear mounting slots, a front retainer, and removable lane dividers.
• Router bit index tray Stepped plywood tray for router and CNC bits with rounded shank holes, tier plates, side risers, and a front label rail.
• Router collet station Wall or bench station for router accessories with collet pockets, bit holes, long wrench slots, keyhole mounts, tray rail, and support gussets.
• Router circle trammel Parametric plywood circle-cutting jig for routers with a long indexed trammel arm, router base plate, pivot block, cap, and handle strip.
• MFT dog-hole template Workbench dog-hole routing template with a 96 mm-style guide grid, clamp slots, edge fences, an index pin strip, and a corner register.
• Concealed hinge jig Laser-cut cabinet door jig for 35 mm Euro hinge cups with screw pilot holes, clamp slots, edge fence, offset comb, and cup-depth gauge.
• Track saw square stop Generic laser-cut guide-rail square with an L-shaped body, rail tongue, edge fence, clamp slots, stop block, and calibration strip.
• Router dado setup gauge Exact-width dado setup aid with a base reference plate, paired guide rails, sample-width comb, and stop block for router joinery.
• Shelf pin index jig 32 mm-style shelf pin line-boring jig with paired guide-hole rows, edge fence, indexing strip, spacer blocks, and depth gauge.
• Router mortise template Compact plunge-router mortising template with a central router window, paired fences, travel stops, and a centerline strip.
• Cabinet pull drill jig Door and drawer hardware drilling template with paired common-spacing pull holes, a center knob hole, edge fence, repeat stops, and centerline strip.
• Bow-tie inlay template Router inlay template plate with multiple butterfly key openings, clamp slots, bushing test holes, clamp rail, and centerline guide strip.
• Door hinge mortise template Door and jamb hinge mortising router template with multiple hinge leaf openings, edge fence, repeat stops, corner-radius tests, and depth gauge.
• Drill sharpening angle gauge Bench drill-bit sharpening reference with point-angle V notches, lip-length windows, an indexed drill-size strip, and grinder-rest setup tabs.
• Drill press drum sander table Auxiliary drill-press sanding table with swappable throat inserts, a dust plenum, vacuum hose port, clamp slots, and underside runners.
• Router sign lettering stencil Reusable sign-making stencil kit with top and bottom alignment rails, end stops, index holes, and geometric guide-bushing letter tiles.
• Router bowl tray template Guide-bushing template kit for routed catchall trays with rounded pocket openings, clamp rails, bushing test strip, depth gauge, and radius gauges.
• Drill press hold-down clamp Workholding kit for safer drill-press operations with a slotted pressure bar, sacrificial pad, base plate, toe clamps, knob washers, and a track gauge.
• Router sled setup gauge Setup kit for slab-flattening router sleds with a router plate, rail spacers, height shims, stop collars, and depth gauge.
• Router corner radius template Reusable router template kit for rounded and chamfered corners with multiple radius windows, guide-pin holes, handle, bushing strip, chamfer gauge, and radius tokens.
• Fold-flat laptop stand Portable laser-cut laptop and tablet stand with stepped side legs, removable cross braces, and a front device lip.
• Caliper measuring rack Wall-mounted rack for calipers, rulers, and layout squares with keyhole mounts, a rounded caliper cradle, ruler slots, and a square notch.
• Modular wall rail Laser-cut wall rail with repeated keyed hanger pockets, wall mounts, spacers, and removable hook plates for rearrangeable tool storage.
• Glue bottle caddy Portable glue station with rounded bottle wells, brush and nozzle slots, low retaining rails, and a center carry handle.
• Sandpaper sizing station Bench-top station for cutting sandpaper to repeatable sizes, with stop holes, a removable-style cutting fence, low lips, and grit divider storage.
• Sanding disc wall rack Wall-mounted rack for orbital sanding discs with separate grit pockets, front label windows, divider fins, keyhole mounts, and an alignment-pin template.
• Spray can wall rack Wall-mounted aerosol can rack with round can wells, a front retainer with label windows, side dividers, keyhole mounts, and a spare nozzle strip.
• Wall clamp rack Wall-mounted clamp rack with repeated open-front bar slots, wall mount holes, end cheeks, and stepped gusset supports.
• Pegboard bit station Pegboard-mounted driver bit station with rear hook tabs, mount slots, dense bit holes, score-label rows, cheeks, and a bottom support.
• Scroll blade tube rack Compact rack for scroll-saw blade tubes with repeated tube holes, accessory holes, side cheeks, a back plate, and front label windows.
• Drill depth stop gauge Laser-cut setup jig for drill bit stop collars with stepped depth notches, bit guide holes, side cheeks, a base, and a front stop fence.
• Drill press stop jig Auxiliary drill press fence system with a slotted base table, indexed fence holes, removable stop block, center insert, and support gussets.
• Corner clamp square Stacked 90-degree assembly square with L-shaped body plates, clamp-jaw reliefs, a holding hole, riser spacers, and a stop tab.
• Dowel center finder Stacked dowel center marking jig with common-size pockets, matching center-pin holes, clamp fences, and label windows.
• Beer bottle caddy Six-bottle plywood carrier with editable bottle slots, low rails, and a laser-cut center handle for gifts or homebrew.
• Wall tool rack Wall-mounted rack with keyhole mounts and evenly spaced tool slots for hanging slim hand tools above a bench.
• Card holder Segmented holder for cards, notebooks, labels, or sanding sheets with editable spacing and a low front lip.
• Paint storage rack Cubby shelf for paint bottles with visible label windows, useful for hobby paints, inks, and small containers.